Single 1x2 Fiber Optic Switch

Overview

The single 1x2 optical switch is a standard 1x2 configuration with 3 fibers and 2 states.

Optical Connectivity

The following diagrams show the optical connections for the different states. The numbers identify the fiber endpoints. In state 1, fibers 1 and 3 are connected. In state 2, fibers 1 and 2 are connected.

State 1

S12 State 1

State 2

S12 State 2
Base Price (USD): $442.98
'
S12 - X1 - X2 - X3 - X4 - X5 - X6 - X7
Option Description Price (USD)
X1: Fiber Type
S1
Singlemode 9/125
Corning SMF-28 9/125 or equivalent
$44.30
M1 Multimode 62.5/125 $0.00
M2 Multimode 50/125 $0.00
M3 Multimode 100/140, Graded Index, NA=0.29 $35.44
M4 Multimode 50/125 Step Index, NA=0.22 $22.15
M5 Multimode 105/125 Step Index, NA=0.22 $35.44
S2
Singlemode HI1060
Corning HI1060 6.2/125@1060 (Nonstock fiber, may be subject to minimum quantity)
$53.16
X2: Latching
N
No
Non-latching switches require continuous drive current and function like a conventional relay, which may not retain state during a power loss.
$0.00
L
Yes
Latching switches require no steady state input power. The switch is set to state 1 or state 2 by a single pulse of 20 milliseconds or longer. Continuous current is preferable to maintain the switched state under high vibrational stress. The latching design retains its switched state during a power loss.
$0.00
X3: Connectors
NC
None
Also known as pigtailing
$0.00
FC FC/PC $83.97
SC SC/PC $83.97
ST ST/PC $83.97
LC LC/PC $83.97
FCU
FC/UPC
Ultra polish
$83.97
STU
ST/UPC
Ultra polish
$83.97
DLC Duplex LC/PC $83.97
FCA FC/APC $115.46
X4: Cables
1
900µm Tight Buffer
900µm tight buffered tube
$0.00
X5: Cable Length
1 1.0 Meter $0.00
2 0.5 Meter $0.00
3 2.0 Meters $53.16
X6: Voltage
5
5V, 100 ohm
Requires a minimum of 4.2V. Low voltages will result in reduced switch speed.
$0.00
3
3V, 35 ohm
Requires a minimum of 2.5V. Low voltages will result in reduced switch speed.
$0.00
5H
5V, 50 ohm
Requires a minimum of 4.2V. Low voltages will result in reduced switch speed.
$0.00
5T
5V, 33 ohm
Requires a minimum of 4.2V. Low voltages will result in reduced switch speed.
$0.00
X7: Loss
L
Low
Typical 0.25 dB loss for singlemode, 0.05-0.10 dB loss for multimode. Utilizes a discrete amount of matching fluid at the gap.
$0.00
N
Normal
Typical 0.7 dB loss for singlemode, 0.5 dB loss for multimode. Features an air gap.
$0.00

Selected Part:

Price (USD):
Quantity Discount:

Discounted Price (USD):
Quantity:

Total:

More Information

For more information, see Switch Overview for information that applies to all switch products.


Subscribe Copyright © 1996-2017 Luminos Industries Ltd. All rights reserved.